top of page

Contractor Grass Fork

The ProDig Contractor Grass Fork is designed for Large and Medium Wheeled Loaders handling grass silage in compact areas or with lower volumes.

​

  • Designed for use on Articulated Loaders.

  • Available in widths from 2.5m to 3.6m.

  • Heavy duty construction using High Yield structural hollow section and plate.

  • 1400mm square profile Hardox tines used in bottom bar for long service life.

  • Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced.

  • Bottom wear pads made from 400 Brinell cutting edge.

  • Full width spill frame to increase capacity and prevent spillage of material onto the loader.

  • Hitches available to suit all machines.

Folding Grass Fork

The ProDig Folding Grass Fork is designed to handle the increased output from a new generation of high capacity silage harvesters. Our fork is designed to withstand the rigorous demands of today’s busy contractor with clever designs to reduce down time.

​

  • Designed for use on Large Wheel Loaders.

  • Heavy duty construction using high yield structural hollow section and plate.

  • Available in widths from 3675mm to 4880mm.

  • 1525mm square profile Hardox tines used in bottom bar for long service life.

  • Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced.

  • 60mm pivot point pin fitted with replaceable phosphor bronzes bushings.

  • Hardened cutting edge full length of bottom section.

  • Fitted with Hydraulic accumulator and buffer pads to increase pivot point lifespan.

  • Side wings can be locked in closed position for safe road transport.

  • Double acting hydraulic ram on each wing.

  • Greasable bushings on all pivot points.

Grass Fork

The Prodig Grass Fork is designed to utilise smaller machines when handling grass or maize silage such as Tractor Loader, Tele-Handler or small Articulated Loader.

​

  • Designed for farmers utilising their own machinery for maize and silage.

  • Available in widths from 2.5m and 3m.

  • Heavy duty fork back with vision windows to view outer tines when loading.

  • 1250mm square profile Hardox tines used in bottom bar for long service life. Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced

  • Engineered and fabricated bottom section for superior structural strength and rigidity.

  • Also available with 1250mm forged stone fork tines in steel bushes.

  • Top spill frame as standard on all grass forks to increase volume and prevent spillage onto the loader.

  • Bolt on or welded hitch system to suit all machines.

Push Off Grass Forks

The Prodig Push Off Grass Fork is designed to quickly and efficiently handle high volumes of grass silage on Large Horsepower Tractors and can also be used on Tele-Handlers/Wheeled Loaders.

​

  • Designed for use on large tractors & loaders.

  • Heavy duty construction using High Yield structural hollow sections and plates.

  • Available in widths from 2.75m and 3m.

  • 1400mm square profile Hardox tines used in bottom bar for long service life.

  • Our full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced.

  • 40mm pivot points fitted with greasable bushings.

  • Hardened cutting edge wear plates on bottom section.

  • Fitted with Hydraulic equaliser valve and buffer pads to reduce impact on gate.

  • Greasable bushings on all pivot points.

Stone Fork

The Prodig Stone Fork has a uniquely designed Hardox cranked tine which allows the fork to move through soil more efficiently. The forks design allows it to be attached to a Tractor Three Point Linkage as well as Front Loader.

​

  • Manufactured with unique cranked 25mm Hardox tines which easily slide under stones in soil.

  • Forks available in widths from 1.8m to 2.5m.

  • Heavy duty fork back with top vision grid to view all tines when loading.

  • Engineered and fabricated bottom section for superior structural strength and rigidity.

  • Fitted with side tines for better load retention.

  • Available with bolt on or welded hitch system to fit all machines.

bottom of page